Thursday, July 22, 2010

Fiber-optic Cables and the Nature of Light






One of the most significant technological breakthroughs in data transmission has been the creation of the fiber-optic cable. It allows data rate of up to 1600Gbs using WDM. Currently, data rates and bandwidth utilization over fiber-optic cable are limited not by the medium but by the signal generation and reception technology available. The fiber-optic cable transmits electromagnetic signals known as visible light.

A fiber-optic cable has a cylindrical shape and consists of three concentric sections: the core, the cladding and the jacket. The core is made up of dense plastic or glass and it is here that the light travels. The cladding is made up of less dense material which reflects the light signals back to the core instead of absorbing it. The jacket surrounds one or more cladded cores to protect against environmental dangers.

Propagation Modes

Before we discuss propagation modes, we need to discuss how light travels through a medium. Light travels through a straight line as long as it is moving through a single uniform substance. When a light enters another substance it changes direction. If the angle of incidence (the angle the light makes with the line perpendicular to the interface between the two substances) is less than the critical angle, the ray refracts to the substance of lower density. If the angle of incidence is equal to the critical angle, the light bends along the interface. If the angle is greater than the critical angle, the ray reflects and travels again in the denser substance.

Multimode

Multimode fiber-optics transmits multiple light signals. How the beam travel depends on the density composition of the core.

Multimode step-index
The core is evenly dense. The light travels straight until it reaches the interface of the core and cladding. The abrupt change causes it to be reflected back to the core. Step-index refers to the abrupt change of direction of the light. There are multiple paths with varying lengths, therefore varying transmission time which limits the data rate. This is the least expensive propagation mode and its commonly used for local area networks.

Multimode graded-index.
The core is densest at the center and the density decreases gradually towards the edge of the core. This varying density allows the light to bend. This allows focusing the signals more efficiently than step-index. This propagation mode is moderately expensive compared to the other two modes and is commonly used for telephone lines.

Single-mode

Single mode uses step-index fiber and a highly focused light source that limits the light beam to a small range of angles close to the horizontal. The core itself has a small diameter and lower density making the path of the light almost horizontal. The propagation time for all signals are almost equal. Delays are negligible. This is the most expensive propagation mode for fiber-optics commonly used for long distance telecom lines.



Fiber Sizes

Optical fibers are defined by the ration of the diameter of their core to the diameter of their cladding.

Type

Core

Cladding

Mode

50/125

50

125

Multimode, graded-index

62.5/125

62.5

125

Multimode, graded-index

100/125

100

125

Multimode, graded-index

7/125

7

125

Single-mode



Connectors

Subscriber Connectors (SC) is used in cable TV. The Straight-Tip (ST) is used for networking devices. It is more reliable than SC. MT-RJ connector has the same size as the RJ45.


Advantages
  1. Very high bandwidth and data rate
  2. Less signal attenuation
  3. Immunity to electromagnetic interference
  4. Resistance to corrosion
  5. Light weight
  6. Difficult to tap
Disadvantages
  1. Installation/maintenance
  2. Unidirectional
  3. Cost

31 comments:

  1. A fiber-optic system is similar to the copper wire system that fiber-optics is replacing. The difference is that fiber-optics use light pulses to transmit information down fiber lines instead of using electronic pulses to transmit information down copper lines. Looking at the components in a fiber-optic chain will give a better understanding of how the system works in conjunction with wire based systems.At one end of the system is a transmitter. This is the place of origin for information coming on to fiber-optic lines. The transmitter accepts coded electronic pulse information coming from copper wire. It then processes and translates that information into equivalently coded light pulses.Think of a Fiber Cable in terms of very long cardboard roll (from the inside roll of paper towel) that is coated with a mirror on the inside.If you shine a flashlight in one end you can see light come out at the far end - even if it's been bent around a corner.

    ReplyDelete
  2. Turkey is now on the market which is the best fiber optic solutions company. I have been working with a company called B & C Fiber Optics before. We are pleased to increase our product range. What are the companies that you would recommend in the fiber optic products sector?

    ReplyDelete
  3. At some point couple of instructive online journals turn out to be exceptionally useful while getting pertinent and new data identified with your focused on range. As I discovered this blog and welcome the data conveyed to my database. Structured Cabling Vancouver

    ReplyDelete
  4. Replies
    1. jio fiber plans

      latest movies online. Get the latest Hindi movies, latest Telugu movies, latest Bollywood movies, latest Hollywood movies, latest Tamil movies online tamilRockers. Get watch latest Hindi movies online updates for free on Rexoxer. फिल्में हमारा मनोरंजन करने का स्रोत हैं। हमारी रोबोटिक जीवनशैली में एक सर्वश्रेष्ठ फिल्म देखने के माध्यम से तनाव से छुटकारा पाया जा सकता है

      Delete
  5. IMPRESSED WITH SUCH A GOOD CONTENT!!
    VERY INTERESTING
    GREAT WORK
    Fiber optic network cabling

    ReplyDelete
  6. Thanks for this informative information about fiber optic cables and the nature of light. From your post, we get much valuable knowledge on this topic. Your blog is valuable to us.

    ReplyDelete
  7. It is very helpful for everyone, thanks for sharing this information..... Kalyx transcanding connections

    ReplyDelete
  8. This blog is helpful and informative with its content on the usefulness.CISCO Firewall Thanks for sharing.

    ReplyDelete
  9. Great blog! The type of the fiber depends upon the material that use, refractive index of the fiber and mode of propagation of light.
    Based On Refractive Index
    Step Index Fibers
    Step Index Fibers
    Based On Material
    Plastic Optical Fibers
    Glass Fibers
    Based On Propagation of Light
    Single-Mode Fibers
    Multi-Mode Fibers

    ReplyDelete
  10. The best Article that I have never seen before with useful content and very informative.Thanks for sharing the info.
    fiber cutter

    ReplyDelete
  11. Hey, Great informative blog; I'd also like to share my best experience with DINTEK Electronics Ltd, a manufacturing company based in Taipei, Taiwan that provides the best cable management products, including Category 6a cable , fibre optic cable , fibre optic connectors , and many others, at reasonable prices and of the highest quality. I placed an order there and received it in just four days with excellent packaging.
    You should give it a shot. Thank you very much.

    ReplyDelete
  12. hey can you suggest me where can i buy best fiber optic cable very affordable prices

    ReplyDelete
  13. Very significant Information for us, I have think the representation of this Information is actually superb one. This is my first visit to your site. Get more information from fiber optic contractor In USA Cost.

    ReplyDelete
  14. Thank you for sharing this informative piece about cables. While the article didn't specifically mention wholesale dealers, it's important to consider the availability of wires and multicore cables through reputable wholesale dealers. These dealers play a crucial role in ensuring a smooth supply chain and competitive pricing for businesses and individuals in need of bulk purchases. Overall, understanding the importance of Wholesale Dealers of Wires and Multicore cable cable market can help customers make informed decisions and ensure a smooth procurement process.

    ReplyDelete
  15. Thanks for sharing this insightful article! Learning about the intricate workings of fiber optic cables and the fascinating nature of light truly enhances our understanding of modern technology. Mellanox MFA1A00-E005 seems like a fantastic choice for ensuring reliable and high-speed data transmission.

    ReplyDelete